How Can You Login To Myrouter.local?

  • The first thing that you need to do is to ensure that the router is powered on. Then establish a connection between your PC and the router.

  • You should preferably establish the connection using an Ethernet cable. If it is not possible to establish a wired connection then you can also establish a wireless connection as well.

  • Once you have established a stable connection, open a browser on your PC.

  • Type http://myrouter.local in the address bar of your chosen browser and search.

  • You can also type 192.168.1.1 in the address bar, which is the default IP address.

  • You’ll see a login page, enter the default password and username on the login page and press enter.

myrouter local
http myrouter local

The default Linksys router’s username and password are:

  • Username – blank field

  • Password – admin

  • If all the login credentials you have entered are correct then you will see a successful login web interface of the Linksys router respectively.

Changing The Linksys WiFi Password Using Myrouter.local

  • To change the password, first, you have to log in to the web interface.

  • After you have successfully logged in, you need to go to the Wireless tab.

  • You now have to select the Wireless Setting.

  • In the Passphrase field enter your new password and then re-enter it in the field just below it for the sake of confirmation.

  • The password for the router would be changed successfully by now.

  • Important to Note: Once you have successfully changed the password for the Linksys router’s WiFi. You’ll notice that all the devices connected with the WiFi earlier will automatically disconnect. You have to reconnect to the WiFi network again with the help of the new password which you have just created using the guidelines mentioned above.

myrouter local login

What If I Forgot My Router Password?

If you have forgotten your router password then, the only possible solution is to factory reset your password and set up a new password again. To know how to do factory reset of your router follow the below steps:  

  • Start by looking for the Reset button at the back of the router.

  • Now take a little pin, needle or paper clip and press and hold the reset button for 10-15 seconds. 

  • Ensure that the router is on when you are doing this process.  

  • Now, after 10-15 seconds you need to let go of the button. 

  • You will see LED light will start to blink and the router will reboot. 

  • After reboot, the router will be set to the factory defaults and you can log into the web interface with the default router password which is ‘admin’. 

Final Words

Hope this guide was useful to you to gain access to the login page of your Linksys router’s web interface. If you have any further queries and are still not able to access the login page then you can contact us for further help.